Endress+Hauser PROline promag 23, Operating Instructions Manual

Page: 43 / 108

PROline Promag 23 5 Operation
Hauser 43
5.2 Brief operating instruction to the function matrix
!
Note:
See the general notes on Page 44.
Function descriptions see the “Description of Device Functions” manual
1. HOME position
F
Enter the function matrix
2. Select a block (e.g. OUTPUTS)
3. Select a group (e.g. CURRENT OUTPUT)
4. Select a function group (e.g. CONFIGURATION)
5. Select a function (e.g. TIME CONSTANT)
Change parameter / enter numerical values:
P
select or enter enable code, parameters, numerical values
F
save your entries
6. Exit the function matrix:
– Press and hold down Esc key (
X
) for longer than 3 seconds HOME position
– Repeatedly press Esc key (
X
) return step by step to HOME position
Fig. 31: Selecting functions and configuring parameters (function matrix)
F06-23xxx
xxx-19-xx
-xx-x
x
-000