Device functions - thermal measuring systems
Proline Fieldcheck
74
Hauser
12.1.1
Group SIMULATION
Function group CONFIGURATION
Function description
FUNCTION
SIMULATION
CONFIGURATION
OPERATION MODE
Use this function to select the operation mode for the simulation.
Users can freely configure a flow signal from 0.0 to the displayed maximum value.
Display:
CONTINUOUS
The flow behavior in the process has low dynamics.
a0001708
Q1 = Simulation value 1
FLOW SPECIFICATION
Use this function to select which measurement is to be simulated.
Options:
MASS FLOW
CORRECTED VOLUME FLOW
Factory setting:
MASS FLOW
SIGNAL 1 LEVEL
Use this function to enter the flow value which is to be simulated.
!
Note!
More information is provided in the OPERATION MODE function.
User input:
0.000 to 999999 (6-digit positive floating-point number)
!
Note!
The flow velocity must lie within the value range from 0.0 m/s to the displayed
maximum value.
Unit:
The unit configured in the measuring device is adopted.
Factory setting:
0.000
Q
Q1
START
STOP
t
