Diagnostic information
Proline 500 PROFINET
60
Hauser
8.3
Configuring the measuring device
The
Setup
menu with its submenus and guided wizards is used for fast commissioning of the
device. They contain all the parameters required for configuration, such as for measurement
or communication.
Depending on the device version, not all submenus and parameters are available in every
device. The selection can vary depending on the order code.
Example: Available submenus, wizards
Meaning
System units
Configure the units for all measured values
Display
Configure the display format on the local display
Low flow cut off
Set the low flow cut off
Empty pipe detection
Configure empty pipe detection
Advanced setup
Additional parameters for configuration:
• Sensor adjustment
• Totalizer
• Display
• Electrode cleaning circuit
• WLAN settings
• Data backup
• Administration
8.4
Protecting settings from unauthorized access
The following write protection options exist in order to protect the configuration of the
measuring device from unintentional modification:
• Protect access to parameters via access code
• Protect access to local operation via key locking
• Protect access to measuring device via write protection switch
• Protect access to parameters via startup configuration → 58
For detailed information on protecting the settings against unauthorized access, see the
Operating Instructions for the device.
9
Diagnostic information
Faults detected by the self-monitoring system of the measuring device are displayed as a
diagnostic message in alternation with the operational display. The message about remedial
measures can be called up from the diagnostic message, and contains important information
on the fault.
