Nanomass Gas Density
Basic safety instructions
Hauser
9
2.3
Occupational safety
If working on and with the measuring device:
‣
Wear the required personal protective equipment according to federal/national
regulations.
2.4
Operational safety
Risk of injury!
‣
Only operate the measuring device in proper technical condition, free from errors and
faults.
‣
The operator is responsible for the interference-free operation of the device.
Modifications to the measuring device
Unauthorized modifications to the measuring device are not permitted and can lead to
unforeseeable dangers.
‣
If, despite this, modifications are required, consult with Hauser.
Repairs
To ensure continued operational safety and reliability:
‣
Carry out repairs on the measuring device only if they are expressly permitted.
‣
Observe federal/national regulations pertaining to repair of an electrical device.
‣
Use original spare parts and accessories from Hauser only.
2.5
Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate. It meets general safety standards and legal requirements. It also
complies with the EC directives listed in the device-specific EC Declaration of Conformity.
Hauser confirms this by affixing the CE mark to the device.
2.6
IT security
We only provide a warranty if the measuring device is installed and used as described in the
Operating Instructions. The measuring device is equipped with security mechanisms to
protect it against any inadvertent changes to the device settings.
IT security measures in line with operators' security standards and designed to provide
additional protection for the measuring device and device data transfer must be
implemented by the operators themselves.