Endress+Hauser Micropilot FMR50 Operating Instructions Manual Download

Page: 83 / 184

Micropilot FMR51, FMR52 HART

Diagnostics and troubleshooting

Hauser

Info number

Info name

I1189

Backup compared

I1256

Display: access status changed

I1264

Safety sequence aborted

I1335

Firmware changed

I1397

Fieldbus: access status changed

I1398

CDI: access status changed

I1512

Download started

I1513

Download finished

I1514

Upload started

I1515

Upload finished

I1554

Safety sequence started

I1555

Safety sequence confirmed

I1556

Safety mode off

12.7 Firmware history

Date

Firmware
version

Modifications

Documentation (FMR51/FMR52, HART)

Operating Instructions

Description of Parameters Technical Information

12.2012

01.00.zz

Original software

BA01049F/00/EN/01.12

GP01014F/00/EN/01.12

TI01040F/00/EN/01.12

02.2015

01.01.zz

• additional languages
• HistoROM functionality

enhanced

• Improvements and

bugfixes

BA01049F/00/EN/03.14

GP01014F/00/EN/04.14

TI01040F/00/EN/05.14

04.2016

01.02.zz

Update to HART 7

BA01049F/00/EN/04.16
BA01049F/00/EN/05.16

GP01014F/00/EN/05.16

TI01040F/00/EN/06.16
TI01040F/00/EN/07.16

contains information on the Heartbeat wizards which are available in the latest DTM version for DeviceCare and FieldCare.

The firmware version can explicitly be ordered via the product structure. In this way it

is possible to ensure compatibility of the firmware version with an existing or planned

system integration.

Summary of Contents for Micropilot FMR50

























































































































































































Search results

Summary of Contents for Micropilot FMR50

Reviews:

Related manuals for Micropilot FMR50

Brands by name

Popular brands

Endress+Hauser Micropilot FMR50, Operating Instructions Manual

Search results

Summary of Contents for Micropilot FMR50

Reviews:

Related manuals for Micropilot FMR50

Brands by name

Popular brands