Endress+Hauser Memosens COS81D, Operating Instructions Manual

Page: 12 / 48

Incoming acceptance and product identification Memosens COS81D
12 Hauser
5. Click on the product image in the popup window.
 A new window ( Device Viewer ) opens. All of the information relating to your
device is displayed in this window as well as the product documentation.
Manufacturer address
Hauser Conducta GmbH+Co. KG
Dieselstraße 24
D-70839 Gerlingen
4.3 Scope of delivery
Scope of delivery of sensor
• Oxygen sensor with protection cap
• Brief Operating Instructions
• Certificate
Scope of delivery of the Memosens COV81 maintenance kit is based on the
configuration
• Spot cap
• O-ring mounting tool
• Cleaning cloth for optics
• O-rings
• Certificate
4.4 Certificates and approvals
A list of all the approvals is provided below. The approvals that are valid for this product
depend on the device version ordered.
4.4.1

mark
Declaration of Conformity
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EU directives. The manufacturer confirms
successful testing of the product by affixing to it the

mark.
4.4.2 EAC
The product has been certified according to guidelines TP TC 004/2011 and TP TC
020/2011 which apply in the European Economic Area (EEA). The EAC conformity mark
is affixed to the product.
4.4.3 Ex approvals
Version COS81D-BA
ATEX II 1G Ex ia IIC T3/T4/T6 Ga
Version COS81D-IA
IECEx Ex ia IIC T3/T4/T6 Ga
Version COS81D-C3
CSA C/ US Class I, Zone 0 AEx ia IIC T6…T4 Ga and IS Class I, Division 1, Groups A, B, C
and D T6…T4
Version COS81D-NA
NEPSI Ex ia IIC T3/T4/T6 Ga