Memosens COS51E
Repair
Hauser
35
L
CAUTION
The standard electrolyte is a strong irritant
Danger of severe skin and eye irritation!
‣
Be absolutely certain to observe the corresponding workplace safety regulations.
‣
Wear protective gloves and goggles when handling the electrolyte.
‣
In case of eye contact: Remove contact lenses, rinse eyes with water for a few minutes
and contact a doctor.
‣
In case of skin contact: Take off wet clothing immediately, wash the skin or take a
shower.
Also pay attention to the safety datasheet of the electrolyte on
1. Remove the sensor from the process and clean.
2.
A0046335
3.
A0046336
2. Unscrew the protection guard or cleaning unit.
3. Unscrew the membrane cap from the sensor head.
10.3.2 Replacing sealing rings
1. Remove the sensor from the process and clean it.
2. Disassemble the sensor → 35.
Summary of Contents for Memosens COS51E
Page 2: ......
Page 33: ...Memosens COS51E Maintenance Endress Hauser 33 6 Mount the sensor 37...
Page 47: ......
