Endress+Hauser Liquiline Mobile CML18, Operating Instructions Manual

Page: 15 / 52

Liquiline Mobile CML18 Electrical connection
Hauser 15
An acoustic signal indicates that charging is complete.
During inductive charging, measurement via the integrated Memosens connection on
the device is not possible.
A message to this effect is shown on the display.
Measurement via M12 cable is still possible.
5.2.2 Charging via M12 USB data + charging cable
The M12 USB data + charging cable has two different connectors:
• M12 connector for connecting to the device
• USB connector for connecting to a computer or USB charger
1.
A0040974
2.
3.
A0040972
4.
A0044054
1. Remove the protective cap.
2. Attach the M12 connector of the cable to the device connection.
3. Screw on the M12 connector of the cable.
4. Connect the USB connector to a USB charger or USB port on a computer.
5.3 Ensuring the degree of protection
Only the mechanical and electrical connections which are described in these instructions and
which are necessary for the required, designated use, may be carried out on the device
delivered.
‣
Exercise care when carrying out the work.
Otherwise, the individual types of protection (Ingress Protection (IP), electrical safety, EMC
interference immunity) agreed for this product can no longer be guaranteed due, for example
to covers being left off or cable (ends) that are loose or insufficiently secured.