Endress+Hauser Liquicap M FMI52, Brief Operating Instructions

Page: 5 / 32

Liquicap M FMI52 HART Basic safety instructions
Hauser 5
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel must fulfill the following requirements to carry out the necessary tasks:
‣
Are trained, qualified to perform specific functions and tasks.
‣
Are authorized by the plant owner or operator to perform specific tasks.
‣
Are familiar with federal or national regulations.
‣
Have read and understood the instructions in the manual and supplementary
documentation.
‣
They follow instructions and comply with conditions.
2.2 Workplace safety
For work on and with the device:
‣
Wear the required protective equipment according to federal or national regulations.
2.3 Operational safety
When performing configuration, testing, and maintenance work on the device, alternative
supervisory measures must be taken to guarantee the operational safety and process safety.
2.3.1 Ex-area
When using the measuring system in Ex-areas, the appropriate national standards and
regulations must be observed. Separate Ex-documentation, which constitutes an integral part
of this documentation, is supplied with the device. The installation procedures, connection
data and safety instructions it contains must be observed.
• Make sure that the technical staff has adequate training.
• The special measuring and safety-related requirements for the measuring points must be
observed.
2.4 Product safety
This measuring device is designed following good engineering practice to meet state-of-the-
art safety requirements, has been tested, and left the factory in a condition in which it is safe
to operate.
It meets general safety standards and legal requirements. It is compliant with the EC
directives listed in the device-specific EC Declaration of Conformity. Hauser confirms
this by affixing the CE mark to the device.
3 Incoming acceptance and product identification
3.1 Incoming acceptance
Check whether the packaging or content is damaged. Check that the goods delivered are
complete and compare the scope of delivery with the information in your order.