Commissioning
Liquicap M FMI52 HART
28
Hauser
6.2
Operation via FieldCare Device Setup
6.2.1
Function scope
FDT-based plant asset management tool from Hauser. It can configure all smart field
devices in a system and helps you manage them. By using the status information, it is also a
simple but effective way of checking their status and condition.
For additional information about FieldCare, see Operating Instructions BA00027S and
BA00059S
Connection options: HART via Commubox FXA195 and the USB port of a computer
6.2.2
Source for device description files
•
www.endress.com
→ Downloads
• CD–ROM (contact Hauser)
• DVD (contact Hauser)
7
Commissioning
The device is operated via the electronic insert, the display or with FieldCare. If a display
is attached to the electronic insert, the function keys
or
and the Mode switch at the
electronic insert are deactivated. All other settings can be made using the function keys
on the display or with FieldCare.
7.1
Installation and function check
Make sure that the post-installation check and final check have been completed before you
start your measuring point:
• go to the chapter "Post-installation check" → 17
• go to the chapter "Post-connection check" → 23
7.2
Setting the operating language
To set the operating language:
1. Go to "Device properties" menu.
2. Go to "Display" submenu.
3. Go to "Language" function.
4. Choose the language from the list.
