Commissioning
Levelflex M FMP43 with PROFIBUS PA
58
Hauser
6.4
Basic setup with display VU331
Function "measured value" (000)
This function displays the current measured value in the selected unit (see "
customer unit
"
(042)
)
function). The number of digits after the decimal point can be selected in the "
no.of
decimals
"
(095)
function.
6.4.1
Function group "basic setup" (00)
Function "tank properties" (002)
This function is used to select the tank properties.
Options:
•
Standard
• Aluminum tank
• Plastic tank
• Bypass / pipe
• Coax probe
• Concrete wall
Standard
The "
standard
" option is recommended for normal containers for rod and rope probes.
Aluminum tank
The "
aluminum tank
" option is designed especially for high aluminum silos that cause an increased
level of noise when empty. This option is only useful for probe lengths greater than 4 m. The
"
standard
" option must be selected for short probes (< 4 m)!
!
Note!
If "
aluminum tank
" is selected, the device calibrates of its own accord when first filled, depending
on the medium's properties. Slope errors can, therefore, occur when beginning the first filling
procedure.
Plastic tank
Select the "
plastic tank
" option when installing probes in wood or plastic containers
without
metallic surfaces at the process connection (see installation in plastic containers). When using a
metallic surface at the process connection, the "
standard
" option is sufficient!
!
Note!
In principle, it is preferable to use a metallic surface at the process connection!
⇒
E HAUSER
E
+
–
⇒
E HAUSER
E
+
–
⇒
E HAUSER
E
+
–
Summary of Contents for Levelflex M FMP43
Page 4: ...Brief overview Levelflex M FMP43 with PROFIBUS PA 4 Endress Hauser...
Page 104: ...Appendix Levelflex M FMP43 with PROFIBUS PA 104 Endress Hauser...
Page 106: ...Levelflex M FMP43 with PROFIBUS PA Index 106 Endress Hauser...
Page 108: ...www endress com worldwide BA358F 00 en 07 07 No 71041163 CCS FM SGML 6 0 ProMoDo 71041163...
