Endress+Hauser Levelflex M FMP40, Operating Instructions Manual

Page: 65 / 92

Levelflex M FMP40 with HART/4...20 mA Accessories
Hauser 65
8.4 Commubox FXA191 HART
For intrinsically safe HART communication with FieldCare via the RS232C interface. For details
refer to TI237F/00/en.
8.5 Commubox FXA195 HART
For intrinsically safe HART communication with FieldCare via the USB interface. For details refer
to TI404F/00/en.
8.6 Commubox FXA291
The Commubox FXA291 connects Hauser field devices with a CDI interface
(= Hauser Common Data Interface) to the USB port of a personal computer or laptop.
For details refer to TI405C/07/en.
!
Note!
For the following Hauser devices you need the "ToF adapter FXA291" as an additional
accessory:
• Cerabar S PMC71, PMP7x
• Deltabar S PMD7x, FMD7x
• Deltapilot S FMB70
• Gammapilot M FMG60
• Levelflex M FMP4x
• Micropilot FMR130/FMR131
• Micropilot M FMR2xx
• Micropilot S FMR53x, FMR540
• Prosonic FMU860/861/862
• Prosonic M FMU4x
• NRF590 tank side monitor (with additional adapter cable)
8.7 ToF adapter FXA291
The ToF adapter FXA291 connects the Commubox FXA291 via the USB port of a personal
computer or laptop to the following Hauser devices:
• Cerabar S PMC71, PMP7x
• Deltabar S PMD7x, FMD7x
• Deltapilot S FMB70
• Gammapilot M FMG60
• Levelflex M FMP4x
• Micropilot FMR130/FMR131
• Micropilot M FMR2xx
• Micropilot S FMR53x, FMR540
• Prosonic FMU860/861/862
• Prosonic M FMU4x
• NRF590 tank side monitor (with additional adapter cable)
For details refer to KA271F/00/a2.