Operating menu and parameter description
iTEMP TMT71
90
Hauser
Additional information
Value
A0014564
Value + bar graph
A0014563
Value 1 display
(Value 2 or 3 display)
Navigation
System → Display → Format display → Value 1 display (Value 2 or 3 display)
Description
Use this function to select a measured value that is shown on the local display.
The
Format display
parameter is used to specify how the measured values are
displayed.
Selection
• Process value
• Device temperature
• Output current
• Percent of range
• Off
Factory setting
Process value
Decimal places 1
(decimal places 2 or 3)
Navigation
System → Display → Format display → Decimal places 1 (Decimal places 2 or 3)
Prerequisite
A measured value is defined in the parameter
Value 1 display
(Value 2 or 3 display).
Description
Use this function to select the number of decimal places for the display value. This setting
does not affect the accuracy of the device for measuring or calculating the value.
If
Automatic
is selected, the maximum possible number of decimal places is always
shown on the display.
