Endress+Hauser Hart Proline Promag P 500, Operating Instructions Manual, Page: 137 / 210

Proline Promag P 500 HART Operation
Hauser 137
Corrected volume flow →  137
Flow velocity →  137
Conductivity →  137
Corrected conductivity
→  137
Temperature →  138
Density →  138
Parameter overview with brief description
Parameter Prerequisite Description User interface
Volume flow – Displays the volume flow currently
measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→  97).
Signed floating-point
number
Mass flow – Displays the mass flow currently
calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→  97).
Signed floating-point
number
Corrected volume flow – Displays the corrected volume flow
currently calculated.
Dependency
The unit is taken from the Corrected
volume flow unit parameter
(→  97).
Signed floating-point
number
Flow velocity – Displays the flow velocity currently
calculated. Signed floating-point
number
Conductivity – Displays the conductivity currently
measured.
Dependency
The unit is taken from the Conductivity
unit parameter (→  97).
Signed floating-point
number
Corrected conductivity One of the following conditions is met:
• Order code for "Sensor option", option
CI "Medium temperature
measurement"
or
• The temperature is read into the
flowmeter from an external device.
Displays the conductivity currently
corrected.
Dependency
The unit is taken from the Conductivity
unit parameter (→  97).
Positive floating-point
number