Endress+Hauser Hart Proline Promag P 500, Operating Instructions Manual, Page: 125 / 210

Proline Promag P 500 HART Commissioning
Hauser 125
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
ECC cleaning cycle For the following order code:
"Application package", option
EC "ECC electrode cleaning"
Enter the pause duration
between electrode cleaning
cycles. 0.5 to 168 h 0.5 h
ECC Polarity For the following order code:
"Application package", option
EC "ECC electrode cleaning"
Select the polarity of the
electrode cleaning circuit. • Positive
• Negative Depends on the
electrode material:
• Platinum:
Negative option
• Tantalum, Alloy
C22, stainless
steel:
Positive
option
10.5.6 WLAN configuration
The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN Settings
‣
WLAN settings
WLAN IP address →  125
Security type →  125
WLAN passphrase →  126
Assign SSID name →  126
SSID name
→  126
Apply changes →  126
Parameter overview with brief description
Parameter Prerequisite Description User entry /
Selection
Factory setting
WLAN IP address – Enter IP address of the device
WLAN interface. 4 octet: 0 to 255 (in
the particular octet) 192.168.1.212
Network security – Select the security type of the
WLAN network. • Unsecured
• WPA2-PSK
• EAP-PEAP with
MSCHAPv2
• EAP-PEAP
MSCHAPv2 no
server authentic.
• EAP-TLS
WPA2-PSK