Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Page: 61 / 108

Fieldgate FXA520 6 Configuring the Fieldgate
Hauser 59
6.3.2 User
Access rights to the Fieldgate are managed with the
User
function. As the administrator, you can
create and manage up to five user accounts here.
Caution!
• To avoid unauthorised access to the Fieldgate setup parameters, the default passwords should
always be changed from the default settings!
Procedure
1 If not already selected, press
Switch to Administration Mode
and log in as administrator.
2 Press
Settings => User
: the
User setup
dialog appears:
3 Enter the parameters you require – their significance is described in the table below:
4 Press
Send
to download the user parameters to the Fieldgate.
User Setup parameters
Table 6-5: Significance of User Setup parameters
Parameter Description
Username
Enter a user name
– max. 8 characters, no umlauts, no special characters
Password
Enter a password for user name
– max. 8 characters, no umlauts, no special characters
Allow HART
operation
Check if the user is allowed access to the connected HART devices
– Activate when creating a user account for an external application, e.g. FieldCare
Allow Fieldgate
Administration
Check if the user is allowed change the Fieldgate configuration
– Deactivate if the user is allowed to view parameters only
Read-only access
Check if the Fieldgate is to be accessed without log-in (applies to all users)
Send
Press to register your changes in the Fieldgate.
Reset
Press to discard any changes made since the previous send.