Ecograph T, RSG35
Maintenance
Hauser
57
11.13 Firmware history
Overview of unit software history:
Unit software
version/date
Software
modification
FDM analysis
software version
Version of OPC server
Operating
Instructions
V01.00.00/07.201
3
Original software
V01.01.02.10 and
higher
V5.00.02.04 and higher
BA01146R/
09/01.13
V01.01.00/02.201
4
E-mail via SSL;
added functionality
V01.02.00.08 and
higher
V5.00.02.04 and higher
BA01146R/
09/02.14
V02.00.00/08.201
5
Added
functionality
V01.03.00.00 and
higher
V5.00.03.00 and higher
BA01146R/
09/03.15
V2.01.00/04.2016 Extended
functionality/bug
fixes
V01.03.01.00 and
higher
V5.00.03.00 and higher
BA01146R/
09/04.16
V2.01.05/11.2016 Extended
functionality/bug
fixes
V01.03.01.01 and
higher
V5.00.03.00 and higher
BA01146R/
09/05.16
12
Maintenance
No special maintenance work is required for the device.
12.1 Updating the device software ("firmware")
Updating the device software ("firmware") via USB stick, SD card or Web server.
You can access this function in the main menu under
"Operation -> SD card or USB stick -
> Update firmware"
.
It is advisable to save the setup and measured values beforehand on the SD card or
USB stick.
The device software ("firmware") should only be updated by a service technician.
The device will restart following the firmware update.
12.2 Instructions for enabling a software option
Various device options can be enabled via an activation code. Available device options can
be ordered as an accessory . → 61Once you place your order, you receive instructions
on how to activate the option and a code which you must enter under
"Main menu ->
Expert -> System -> Device options -> Activation code"
.
12.3 Cleaning
The front of the housing can be cleaned with a clean dry or damp cloth.
