Endress+Hauser Ecograph RSG35, Operating Instructions Manual

Page: 39 / 174

Ecograph T, RSG35 Operation
Hauser 39
10.3 Reading measured values
6 4 3 2
1
5
7
8
9
10 11
12
A0020602-EN
 8 Front of device with open flap
1 Navigator: press briefly to open the main menu and confirm messages (=Enter); press for longer to open the
online help
2 Orange LED for read/write access to the SD card
3 Slot for SD card
4 USB-B socket "Function"
5 Green LED lit: power supply present
6 USB-A socket "Host"
7 Status bar
8 Area for measured value display (e.g. curve display)
9 Header: group name, analysis type
10 Header: current date/time
11 Header: alternating display indicating the percentage space on the SD card or USB stick that has already been
used. Status symbols are also displayed in alternation with the memory information
12 Display of current measured values and the status in the event of an error/alarm condition. In the case of
counters, the type of counter is displayed as a symbol
An overview of all the symbols and icons is provided in the operating options section.
→  27
If a measuring point has limit value status, the corresponding channel identifier is
highlighted in red (quick detection of limit value violations). During a limit value
violation and device operation, the acquisition of measured values continues
uninterrupted.
Information on how to rectify a problem in the event of an error is provided in the
"Troubleshooting" section. →  50
10.4 Reading measured values via the Web server
A Web server is integrated into the device. If the device is connected via Ethernet, it is
possible to display the measured values via the Internet using a Web server.