Specifications
multi EA 5000
180
Computer specifications
Graphics resolution
1280x1024
(1024x768 possible with restrictions)
CD/DVD drive
Interface
Required for software installation
1 USB 2.0
Operating system
Windows 8.1, Windows 10 (32, 64 bit )
Other
Activation of DoNetFrameWork 3.5
17.2 Technical data of the CLD 5000
Procedural data
Analytical parameters
Total nitrogen TN
Detection principle
Chemiluminescence
Measuring range (N in sample)
0.01 to 10000 mg/l N
Measuring range (N absolute)
0 to 100 µg N
Electrical variables
Power supply
110 to 240 V +10/-5 %
Overvoltage category
II
Frequency
50/60 Hz
Module fuse protection
Number of device fuses
T 4.0 A H
2
Typical average power consumption
200 VA
Interface to the basic module
RS 232
Only use original fuses from Analytik Jena!
Gas supply
Oxygen 4.5
80 ml/min
400 to 600 kPa (4 to 6 bar)
General characteristics
Dimensions (W x H x D)
300 x 500 x 550 mm
Mass
13 kg
17.3 Technical data for the Cl module
Procedural data
Analytical parameters
AOX, EOX, TX, TCl, TOX, TIX
Detection principle
Micro-coulometric end point titration
(argentometry)
Sample feed
¡
In carrier gas stream (from basic
module)
¡
Direct injection of aqueous samples
and HCl for test purposes (into the measuring cell)
Temperature control for measuring cell
Integrated cooling
Stirring mechanism of the measuring
cell
Integrated magnetic stirrer
(with fixed speed)
