Function and setup
multi EA 4000
22
Figure 7 Control elements behind the front door of the multi EA 4000
1 On/Off switch
2 Flow regulator to control the oxygen
or argon flow "Ar/O
2
"
3 Flow regulator to control the oxygen flow "O
2
"
4 Flow regulator to control the "pump" intake flow
Located on the right-hand side of the multi EA 4000 are the openings of the combus-
tion furnace with gas sluice and gas hoses for oxygen and argon. Through the channel
(4 in Figure 8) the measuring gas and bypass hoses can be routed to the Cl module.
Figure 8 Connections on the right-hand side of the multi EA 4000
1 Opening of the combustion furnace with
gas sluice and heat guard
2 "O
2
" connection for connection to the
combustion tube/gas sluice/TIC reactor
3 "Ar" connection for connection to the
combustion tube/gas sluice
4 Channel for measuring gas and bypass hoses dur-
ing Cl measurements
Connections on the right-
hand side
Summary of Contents for Analytik Jena multi EA 4000
