INTRO
Two of Cups is 6 HP intuitive eurorack sample player with 8 banks of samples. It
consists of 2 identical sample player voices with zerolatency playback, each having
CV control over Pitch, Gate and Meta samples scan. Additionally each channel
features a Parameter knob that can set the Decay of the internal ASR Envelope
(min. 10 mSec., max. 10 Sec.), Sample volume, Pitch Offset with +/ 2 octaves,
Sample Select over 24 samples, enable / disable Looping and Reverse playback.
Modules plays WAV files of arbitrary sample rate: 8 and 16 and 24 bit samples with
12 bit output bitrate.
Factory soundbank by Julia Bondar.
Firmware v2R video manual: https://youtu.be/69CwM8faryY
Initial firmware v1 quick start guide: https://youtu.be/rdacPSxF4n4
CONNECTING THE POWER
Before installing a new module in your case, ensure your power supply has a free
power header and sufficient available capacity to power the module.
Connect the module directly to the power busboard with supplied 1016 ribbon
cable like any other eurorack module. Pair of
RED
/
BROWN
pins on the multicolor
ribbon cable corresponds to
NEGATIVE 12 VOLTS
.
Make sure to align the power cable with the
‘RED/BROWN STRIPE
’
label on the
module that corresponds to 12V, to the 10pin connector and with typically a white
line for the 16pin connector on the bus board.
TECHNICAL SPECIFICATIONS
Width: 6 HP/TE, depth: 25 cm / 1” with inserted ribbon cable
Current draw: +12V: 125 mA, 12V: 20 mA
CV range: 0…+5V typically with up to 5…+5V compensated with offset knobs.
Audio output: t/5V eurorack standard
Summary of Contents for TWO OF CUPS
Page 1: ...TWO OF CUPS FIRMWARE V 2 R...
Page 5: ...INTERFACE...
