2
1.
If appropriate remove existing light fitting. Ensure there is a solid mounting, preferably a stone or concrete
path/ drive, brick or block wall or wooden decking. Ensure the fixing can support the Post Lantern.
2.
Refer to generic diagram which is a representative example; the Base must be screwed to the path/ drive or
wall with screws and plugs as appropriate.
3.
See the additional sheet for your particular fitting.
4.
The base mounted lantern may be connected to the supply and the base screwed in position before assembly
of the lantern frame to the base. Taller post lanterns will require assembly before mounting the base.
5.
See generic diagrams below and the additional sheet before connecting the supply wiring.
6.
Unscrew the terminal block box and connect the supply according to the diagram below. Ensure no strands of
wire escape the terminal block. When you are sure of the connections screw the box back together with the
long tab downwards, ensure no wires are damaged, trapped or left exposed.
7.
Fix your post lantern in position by screwing the base down, ensuring no wires are damaged, trapped or left
exposed.
8.
Refer to additional instruction sheet to complete the assembly of your Lantern and to install a bulb.
screws and plugs
Generic Diagram
Terminal Block in Generic Diagram (may be 2 way Class II)
All Light Fittings for UK Market are designed for 240V ac, 50 Hz (220-240V ac)
Please retain these instructions for future reference.
Switch off and allow 10 minutes to cool before cleaning, use only dry cloth.
Assembly/ User Instructions
Care Information
20150310 Ref: GI 41v2
Endon Lighting
LS9 0SE
