Assembly/ User Instructions Continued
Endon Lighting, LS9 0SE
6.
Place the light fitting over the threads of the securing screws and refit the finials (A) to secure. Make sure the
rubber seal (F) is in place to maintain the IP rating and ensure the fitting is correctly oriented - lampholder must
point upwards.
7.
Place glass panels (G) into the metal shade frame (H). Secure in place with the supplied screw fixings (I & J)
8.
Fit the bulb (K - not supplied).
NOTE: Never fit bulbs of a higher wattage than those specified on the label
as these may cause overheating and damage the fitting.
9.
Place the shade top (L) onto the metal shade frame and secure in place with the finials (M)
10. Turn on the power and test.
11.
76548 is fitted with a PIR sensor (N). Please see overleaf for adjustment details.
76546_76548-Burford-WB 20180626
C D
B
F
E
N
A
H
G
I
J
K
M
L
NEUTRAL
EARTH (GREEN/YELLOW)
SWITCHED LIVE
BLUE (N)
GREEN/YELLOW
BROWN (L)
SUPPLY
LIGHT FITTING
