Page 12
WI-FI IN.TOUCH 2
(OPTIONAL)
If your
RECSPORT
Recreation System is equipped with the Wi-Fi
in.touch 2 module you will be able to use the internet or your home Wi-Fi
network to control your
RECSPORT
Recreation System by downloading
an App to your favorite devices. Use the instructions that came with your
module or simply download the App to your device by searching "gecko
in.touch 2" in your App store.
For more instructions go to:
www.geckodocs.
com/accessories
and find the in.touch 2
TechBook or scan the QR code to the right.
This menu is only visible when the
in.touch 2 module is installed.
Pressing the
button illustrates
that your
RECSPORT
Recreation
System has the in.touch 2 system
installed but
DOES NOT
indicate if
your Wi-Fi is working with your
RECSPORT
Recreation System
AUDIO IN.STREAM 2 (OPTIONAL)
If your
RECSPORT
Recreation System has the optional in.stream 2
Bluetooth w/subwoofer system the following screens and functions will
be available on the control panel:
AUDIO
The control panel is used with the in.stream 2 audio system. The Audio
screen in the Settings menu gives you the option to disconnect your
Bluetooth enabled device, adjust
the Fader, Balance or Sub Woofer.
Use the or buttons to scroll
to desired option, press
(middle left) lit button to select the
function. Press the or
buttons to change parameters.
Press
(top left) lit button to
take you back to the main Settings
menu.
IN.STREAM 2 FUNCTIONS
Press the
button in the home screen to access your audio system.
If you are using a device with Bluetooth technology, it must be connected
for functions to work.
Please note that the Play/Pause and Change Track functions apply to
devices using Bluetooth technology only, and will NOT work when AUX
is selected as the source.
TURNING POWER ON/OFF
Press the
(top right) lit
button to start the audio on or
off process.
SELECTING THE SOURCE
Press the
(top left) lit
button to select a source using
Bluetooth wireless technology
or AUX (aux is not available at time of publication). Selection will be
indicated below In.stream 2.
PAIRING BLUETOOTH
Audio Power must be on. Go to the Bluetooth settings on your device
and find in.stream 2 and press to connect. Enter pin 5555 and press pair
to sync your device.
NOTE:
Only one device at a time can be synced.
PLAY/PAUSE AUDIO
Press the Play/Pause
(middle right) lit button to start or pause the
audio. Press
(middle left) lit button to mute or enable sound.
ADJUSTING THE VOLUME
Press the or buttons to increase or decrease the volume
illustrated by the slider bar.
CHANGING TRACKS
Use the Last Track and Next Track
(lower left) lit button or
(lower right) lit button to change tracks.
TEMPERATURE CONTROL
The set temperature range is from 59°F to 104°F (15°C to 40°C). (The
water temperature of any
RECSPORT
Recreation System may rise
or lower slightly depending on the current use and condition of your
RECSPORT
Recreation System and on outside temperatures.)
The set temperature of the
RECSPORT
Recreation System water will
automatically be 85°F (29.5°C) the first time power is applied. This is the
setting programmed at the factory. After the
RECSPORT
Recreation
System has been set up and used, the last temperature value set by
the user will be stored in memory. If power is disconnected from the
RECSPORT
Recreation System, it will automatically revert to the last set
temperature when power is reapplied.
To display the set temperature of the
RECSPORT
Recreation System:
Press the or buttons on the
control panel in the home screen.
To increase the set temperature of
the Recreation System:
Press the button in the home
screen. The set point will appear in
blue. After 3 seconds without any
change to the set temperature
value, the current water temperature will reappear in white.
To decrease the set temperature of the
RECSPORT
Recreation
System:
Press the button in the home screen. The set point will appear in blue.
After 3 seconds without any change to the set temperature value, the
current water temperature will reappear in white.
Operating Instructions
