Enders 4942, Assembly And Instruction Manual, Page: 8 / 12

8
GB
Instruction manual
Usage preparations:
A Push the locking device left to separate the water tank (6) from the wastewater
tank (7).
B Swivel the emptying nozzle (10) up and add a sanitation supplement such as ENSAN
GREEN or ENSAN BLUE for the waste tank. Observe the dosage instructions on
the bottle. Fill up with 2 litres of water.
C Screw the emptying nozzle cap onto the emptying nozzle (10). Put the two parts of
the toilet back together by pushing the water tank onto the wastewater tank.
D Fill the water tank (6) with freshwater (max. 1 5 litres).
Add Enders ENSAN RINSE. Observe the dosage instructions on the bottle.
Usage:
E With the toilet seat (1) down and the lid (2) closed, open and close the waste slider
seal (8) once. This allows excess pressure to escape.
F Using the pump (5) rinse the toilet with freshwater. Open the slider seal (8) to let
the contents of the toilet fall into the waste tank (7). Then close the slider seal.
The level indicator (11) shows you when the wastewater tank needs to be emptied.
G Disconnect the toilet and empty the wastewater tank (7) at an approved disposal
site or in a normal toilet.
H Empty the wastewater tank via the emptying nozzle (10).
Do not use normal toilet paper as this can block the emptying nozzle. Instead, use
Enders “ENSAN WC Paper”.
1. Removable toilet seat
2. Removable lid
3. Cap for water tank
4. Toilet bowl
5. Pump
6. Water tank (max. 1 5 litres)
7. Wastewater tank (max. 1 4 litres)
8. Slider seal
9. Ventilation
10. Cap for emptying nozzle
11. Wastewater tank level indicator
12. Slider
13. Release lever