1.Introduction
1.1 The Product:
This Battery Analyzer is designed to test the condition of the automotive
battery using conductance method. Unlike the conventional method of draining the
battery by applying resistance load to it and obtain the result from the
meter gauge; this analyzer utilizes a series of pulsed voltage across the battery cells
and observes the AC current that flows in response to it.
The benefits of this test method are:
•
Conductance correlates directly to the battery capacity
•
Passive testing method is safe.
•
Never discharges or drain the battery.
•
Able to test condition of discharged battery.
•
Consistent and repeatable results.
•
Provides unique indication of battery conditions.
It is maintenance free and no internal batteries required. It powers up when
connected to the battery posts during testing.
The operation is fast and simple. When hooked up to the battery posts, the displayed
instructions on the screen will lead you through and a warning tone to caution you to
perform the correct steps.
Its result is consistent and repeatable and can be performed numerous times without
heating up the unit. It is very safe as it does not create any sparks when connected to
the battery terminals during testing on the vehicle.
1.2 Specifications:
System Voltage: 12V
Input voltage range: Analyzing Capacity(Amps): 9V~30V
CCA
100~2000
EN
100~2000
IEC
100~1400
DIN 100~1400
JIS
(100~2000 CCA)
Power Requirements: No internal batteries required. Power on when hooked up during
testing.
Application: Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and
Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed
Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery
standards JIS, SAE, EN, DIN and IEC are supported.
2. Safety Measures:
