User Manual
Slam Stick User Manual
Version No. 2.0
9
Table 2: Included Hardware with Each Slam Stick
Description
Part Number
Quantity
Slam Stick Data Logger
LOG-0002/3/4
1
USB to Micro USB Cable
4868
1
4-40 Bolts, ¾” Long
96006A217
3
3M 950 Adhesive Transfer Tape, 1 in x 5 yd
1-5-950
1
Plastic Scraper Blades
095394100115
3
Midé recommends that the Slam Stick be mounted with the included 3M 950 adhesive transfer
tape and/or 4-40 bolts. A roll of tape is included with the initial purchase; but additional rolls can
be purchased through a variety of distributors including Amazon and Digi-Key.
The included tape is used for calibration. Calibration is not valid if other tape is used. If
modification to the mounting environment is possible, 4-40 bolts can be utilized along with the
tape. The plastic scraper blades included with each kit are recommended for removing the tape
and cleaning the underside of the Slam Stick. Additional bolts can be purchased through
McMaster-Carr. The part numbers for the tape, bolts, and plastic blades included in Table 2 are
the manufacturer part number used by the distributors.
Figure 3: Slam Stick X package includes the data logger, a micro USB cable, three bolts, a roll of mounting tape, and
three scraper blades for tape removal.
