Encore Rage ER52FX730V, Operator'S Manual

Page: 22 / 37

22
RECOMMENDED MAINTENANCE SCHEDULE(S)
Maintenance Service Interval Maintenance Procedure
Before each use or daily

Check the engine oil level

Check the mower blades

Check the safety interlock system

Check for loose hardware

Check for belt obstructions

Check for fuel and oil leakage

Clean the engine and exhaust system area

Clean the grass and debris build-up from the machine and
cutting deck, including under the deck
After the first 8 hours

Change the engine oil
After the first 100 hours

Check the wheel hub torque

Torque the wheel lug nuts

Clean dust and dirt from cylinder and cylinder head fins

Change engine oil

Clean and regap spark plugs
After the first 250 hours

Change the hydraulic filter and replace the fluid in the
reservoir
Every 40 hours

Check the hydraulic oil level

Check the condition of the belts

Check the tire pressures

Lubricate the caster wheel bearings
Every 100 hours

Change the engine oil.
Every 200 hours

Grease the lift linkage pivots

Change engine oil filter
Every 250 hours

Replace the primary air cleaner

Check secondary air cleaner
– replace if dirty. See the
Engine manual for additional information
Every 500 hours

Change the hydraulic filter and fluid (Synthetic 15W50)

Check the wheel hub torque

Torque the wheel lug nuts

Replace the secondary air cleaner. See the engine manual
for additional information.
Monthly

Check the battery charge
Yearly

Grease the front caster pivots