Multi-room Audio
Distribution
System
Quick
User’s Guide
POWER ON & OFF
Keypad Power On
Press the
•
POWER button on the
keypad. The keypad will light blue when
the power is turned on.
Keypad Power Off
While the keypad is powered, press the
•
POWER
button on the keypad.
Entire System Power Off
Press and hold the
•
POWER button for about three
seconds. All keypads in the entire system will power off.
SOURCE SELECT
Changing the Audio Source
Press the
•
SOURCE button on the
keypad to change the audio source.
The source indicators will light to show
•
which audio source is selected;
L (Local), 1, 2, 3, or 4.
VOLUME CONTROL
Turning the Volume Up or Down
Press
•
VOL
▲
to increase the keypad’s
volume.
Press
•
VOL
▼
to decrease the keypad’s
volume.
The volume indicators will show the set
•
level. The more indicators lit, the louder
the volume.
AUDIO MUTE
Muting the Keypad’s Sound
While the audio is playing, press the
•
MUTE button to silence the audio.
The bottom volume indicator will blink while mute
•
is active.
Press the
•
MUTE button again to return the keypad to
its previous volume setting.
Pressing the
•
VOL
▲
or
SOURCE buttons will also
return the keypad to its previous volume setting.
Pressing
•
VOL
▼
will un-mute the audio and set the
keypad to minimum volume level.
WHOLE-HOUSE MODE
Playing the Same Source at all Keypads
Press the
•
SOURCE button for about three
seconds to enter or exit whole-house mode.
The selected audio source indicator will blink and audio
•
will play at all keypads (volume set by each keypad).
If a keypad is set for do not disturb, it will not play the
•
source (see back of this card).
Pressing the
•
SOURCE button on any keypad will
change the audio source;
1, 2, 3, or 4 for all keypads.
Audio from local audio wall plates (source
•
L) cannot
be the whole-house mode source.
PRINTER’S INSTRUCTIONS:
INSTR,ENC-DRS,QUICK USER - LINEAR P/N: 229171 B - INK: BLACK - MATERIAL: 80 LB. WHITE COATED COVER - SIZE: 5.500” x 2.875” - SCALE: 1-1 - SIDE 1 OF 2
VOL
POWER
MUTE
SOURCE
SOURCE
