4. Open
sealer fully and
center jaws of sealer
over
marks
on each sea
l.
Crimp or
notch each
sea
l
t
he
proper
number of times
by bringing
the t
o
p handle
downward as
far as
it
will go.
See
Figure
4.
5.
Release
tensioner from strap by bring
i
ng
handle
down
until
gripper release cam
locks
in
tensioning hand
l
e pin. Remove tensioner
curl and sliding
tool away from s
t
rap. See
figure
5
.
6. Use short strokes on
tensio
n
ing
handle
:
Do
not
tension
st
r
ap when you are
i
n
an
awkward posit
i
on.
TOP OF LOAD OPERATOR
SAFETY
BELTS
RECOMMENDED FOR
H
I
GH
LOADS.
While
tensioning strap, do not
rotate the
tensioning handle
to
the point where it
will
contact the
gripper
release cam.
This will result in a loss of strap te
n
sion.
FIGURE 4.
RECOMMENDED TENSION HANDLE
OPERATING RANGE