31
www.encore-usa.com
[ Option 2: Entering the Adapter’s PIN Code to the Router or Access Point ]
Note:
To enter your adapter’s PIN code to your router or access point, you need to know
your router or access point’s IP address.
In addition, you need to have one of the following:
A computer
directly connects to the router or access point through wired
connection.
This computer can be the one with ENUWI-2XN4 installed on or a
different one
.
A computer
already connects to the router or access point through wireless
connection.
For example, this could be your laptop computer.
A.
1.
Go to the “
Wi-Fi Protected Setup
”
tab.
2.
Click on “
Pin Input Config (PIN)
”
3.
Within two minutes
, enter the
wireless adapter’s
PIN code into
your router or access point’s
Web-based Utility through a web
browser.
Note:
To complete
Step 3
, you need to
know your router or access point’s
IP
address
to access its Web-based Utility.
B.
Once connected, the tab will
automatically switch to the “
General
”
tab. The ‘
Signal Strength
’ and ‘
Link
Quality
’ bars will become active and
green.
Note:
The ‘
Encore Wireless Manager
Tray Icon
’ at the lower right corner of the
screen will become green as well.
Summary of Contents for ENUWI-1XN4x
Page 42: ...41 www encore usa com ...