5. After your computer is restarted, connect the ENUET-USB USB cable to any
available USB port on your computer. A pop-up message will appear in the
notification area indicating the installation is completed.
* Actual strings depend on your operation system. These screen shots are from Windows
XP and may be different from your computer.
Now, that the installation is completed. You can connect the ENUET-3USB
adapter to a network device using a CAT-5 or CAT5e or better Ethernet cable,
you can connect the ENUET-3USB without powering off your computer or
laptop:
1. Connect one end of the Ethernet cable to the Ethernet port on the
ENUET-3USB adapter’s RJ-45 port.
2. Connect the other end of the same Ethernet cable to your network hub,
switch or router.
The Link LED should light up green to indicate a proper physical connection
between the adapter and the network. If the Link LED doesn’t light up, please
verify the cable connections between all the network devices and make sure the
network switch is working.
ENUET-3USB User’s Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
7
