ENRTR-514 User’s Manual
- 27 -
3.6 NAT
3.6.1 Virtual Server
If you configure the Broadband Router as a virtual server, remote users accessing services such as Web
or FTP at your local site via public IP addresses can be automatically redirected to local servers configured
with private IP address. In other words, depending on the requested service (TCP/UDP port number), the
Broadband Router redirects the external service request to the appropriate server.
Enabled:
Enable the Virtual Server option.
Private IP:
This is the LAN client/host IP address that the Public Port number packet will be sent to.
Private Port:
This is the port number (of the above Private IP host) that the below Public Port number will
be changed to when the packet enters your LAN (to the LAN Server/Client IP)
Public Port:
Enter the service (service/Internet application) port number from the Internet that will be
re-directed to the above Private IP address host in your LAN.
Type:
Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it to the
default both protocols.
Comment:
The description of this setting.