manualshive.com logo in svg

Encore ENPWI-N, User Manual

Share
Download
Encore ENPWI-N User Manual Download Page 11

 - 

3 

- 

HARDWARE INSTALLATION 

LED Indicator for CardBus 

Link 

The Link LED indicator lighted green when ENCORE 802.11n Wireless LAN 
Adapter is connected to wireless network successfully.  

ACT (Activity) 

The ACT LED indicator blinking green when ENCORE 802.11n Wireless LAN 
Adapter is transmitting or receiving data. 

LED Indicator for PCI 

Link 

The Link LED indicator lighted green when the 300Mbps 802.11g Wireless LAN 
Adapter is connected to wireless network successfully. 

Check the installation 

The LEDs of the Wireless LAN Adapter are clearly visible and the status of the 
network link can be seen instantly: 
1.

 

Once the device is plugged to the station’s CardBus/PCI slot, the LED of the 
Wireless LAN Adapter will light up indicating a normal status. 

2.

 

When the device plugged to the station’s CardBus/PCI slot and the driver was 
installed, the ACT will start alternate blinking, it means that the device is starting 
to scan the wireless devices near the Wireless LAN Adapter. 

3.

 

While the Wireless LAN Adapter linked up and transmitting data to the Access 
Point or to other Wireless LAN station, the Link LED will lighted green. 

 

Summary of Contents for ENPWI-N





























Reviews:

No comments

Brands by name

Popular brands

Load more brands