![Encore ENDSL-AR Datasheet Download Page 3](http://html1.mh-extra.com/html/encore/endsl-ar/endsl-ar_datasheet_2406227003.webp)
Encore Electronics 2005
ENDSL-AR
3
Product Specifications and Details
Supported ADSL Standards
•
ANSI T1.413 issue 2
•
ITU-T G.992.1 (G.dmt)
•
ITU-T G.992.2 (G.lite)
•
G.994.1 (G.hs, Multimode)
•
ITU-T G.992.3 (ADSL2 G.dmt.bis)
•
ITU-T G.992.4 (ADSL2 G.lite.bis)
•
ITU-T G.992.5 (ADSL2+,Annex A, B, I, J, L
& M)
•
Reach Extended ADSL (RE ADSL)
ATM Support
•
Support up to 8 PVCs ATM Forum UNI
3.1/4.0 PVC Traffic Shaping UBR, CBR,
VBR-nrt
Multi Protocol over AAL5 (RFC1483 /
2684)
•
Classical IP over ATM (RFC 1577)
•
OAM F4 and F5 segment end-to-end
loopback, AIS, and RDI
•
OAM cells
•
VC and LLC Multiplexing
•
VPI is 0-255 and VCI is 32-65535
•
ATM SAR (Segmentation and
Reassembly)
•
PPP over Ethernet (RFC 2516)
•
PPP over ATM (RFC 2364)
•
PPP over PAP (Password Authentication
Protocol; RFC1334)
•
PPP over CHAP (Challenge Authentication
Protocol; RFC1994)
Bridging and Routing
•
Ethernet to ADSL self-learning
•
Transparent Bridging (IEEE 802.1D)
•
IP routing-RIPv2 (backward compatible
with RIPv1)
•
Routing (TCP/IP/UDP/ARP/ICMP)
•
Static IP routing
•
ICMP (Internet Control Message Protocol)
•
IGMP (Internet Group Management
Protocol)
•
IP Multicast IGMP v1/v2
•
MIB II Support (RFC1213)
•
PAT (Port Address Translation)
Security
•
PAP (Password Authentication Protocol)
•
CHAP (Challenge Authentication Protocol)
•
User authentication for PPP
•
Password Protected System Management
•
VPN (IPSec, PPTP, L2TP) Pass-Through
HTTP Web-based management
•
Firmware upgrade via FTP / TFTP (Web-
based)
•
SNMP Support
•
WAN and LAN connection statistics
•
Selection of Bridge or Router Mode
•
Configuration of VCs (Virtual Circuits)
•
Configuration file backup and restore
Hardware Interface
•
One USB port compliant with USB v1.1, full
speed (12Mbps)
•
One RJ45 port compatible with IEEE
802.3/802.3u, 10/100Mbps auto selection
•
One RJ11 port for ADSL connection
•
One Power switch button for power on/off
•
One reset button for restoration of factory
default setting
Support Operating Systems
•
Windows 9X, ME, 2000, XP,Linux and
MAC
Power Requirement
•
Power Adapter: Input 110+10 or 230+10
•
VAC, Output 12VAC, 1000mA
Power Consumption: less than 10 Walt
Environmental
•
Operating temperature: 0°C ~ 70°C
ambient
•
Humidity: 5 % ~ 95 % (non condensing)
•
Storage temperature:-40°C ~ 70°C