on application. You may use telnet or Web to remotely manage the ADSL Router. User just
needs to enable Telnet or Web and give it an IP address that wants to access the ADSL Router.
The default IP 0.0.0.0 allows any client to use this service to remotely manage the ADSL Router.
ACL:
There has
Activated
&
Deactivated
option. The default setting is
Deactivated
which
means all IP can access via router. If you choose
Activated
, you only can access via router by
listed IP addresses.
ACL Rule Index:
Index number from 1 and up to 16.
Active:
Once you choose
Yes
then you can access the IP via router.
Application:
Each of these labels denotes a service that you may use to remotely manage the
Router. Choices are
Web, FTP, Telnet, SNMP, Ping, ALL
.
Interface:
Select the access interface. Choices are
WAN, LAN
and
Both.
For Example:
How to set your ACL?
1. You must choose
Activated
to enable your ACL function.
2. Select the ACL Rule Index number (up to 16 number)
63
3. You can set the specific
Secure IP address
or set
0.0.0.0
for all IPs.
Summary of Contents for ENDSL-A2+WIGX2
Page 68: ...67...
