![background image](http://html.mh-extra.com/html/encore/e9/e9_installation-manual_2406082019.webp)
E9 IN REV. A
19
1. Turn the Ignition 'switch
‘ON/OFF’ 3 TIMES
and stay in
OFF position
.
2. Push the Valet switch
6 times
(holding in on the
6
th
push
) until one long chirp is heard then release the valet
switch. You are now in the Start feature
“D”
programming mode.
3.
Press and release the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
Four Chirps /
LED four pulse
1
+
Gasoline Engine
Diesel Engine
with
Wait-To-Start
Light
Diesel Engine
without
Wait-To-Start
Light
10 seconds
warm-up timer
Diesel Engine
without
Wait-To-Start
Light
15 seconds
warm-up timer
Diesel Engine
without
Wait-To-Start
Light
20 seconds
warm-up timer
2
Factory alarm
disarm with
channel 3 on
Without this
feature
3
Constant
parking light
output upon
Remote Start
Flashing parking
light output upon
Remote Start
4
20 minutes run
time
30 minutes run
time
10 minutes run
time
5 minutes run
time
5
Door lock After
start(RUN)
Door un-lock
before start &
Lock after start
Door lock before
start and Door
lock after
shut-down
Without this
feature
6
+
Temperature-
Control Starting
OFF
Temperature-Co
ntrol Starting
“ON”
0 ºF / -18 ºC
Temperature-Cont
rol Starting “ON”
15 ºF / -9 ºC
7
+
Press
button =
Activate Remote
Start.
Press
-
button =
Activate Remote
Start.
8
+
White/ Blue
wire=
1 pulse activate
White/Blue
wire=
2 pulse activate
White/Blue
wire=
3 pulse activate
Exit:
Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
SAFE START (Child safety mode)
Factory defaults setting to press the
button once to start the vehicle.
Programming this feature to eliminate an accidental remote start,
1. The user presses the transmitter
buttons
“twice”
within 3 seconds to start the vehicle. or
START FEATURE “E” PROGRAMMING:
1. Turn the Ignition 'switch
‘ON/OFF’ 3 TIMES
and stay in
OFF position
.
2. Push the Valet switch
7 times
(holding in on the
7
th
push
) until one long chirp is heard then release the valet
switch. You are now in the Start feature
“E”
programming mode.