When the right or left turn indicator is ON and an object is seen by the rear sensor ONLY on that side the buzzer will
start to signal with a Bi..Bi.. Sound. This sound level can be adjusted at switch on the buzzer.
FAQ:
The unit does not respond at all.
Please check the power and ground connections and insure that the inline
fuse is not damaged or blown.
The LED Indicators do not work correctly.
Please insure that the sensors are plugged in to the correct points of
the harness. Please also make sure there is nothing that could cause the front sensors to activate.
Bring the vehicle to an open area and retest the install.
The sensors false or do not react to objects.
Please ensure that the sensors are installed with the UP arrow
facing upward. Also insure that the sensors are not in contact with any metal part of the vehicles frame and are
clear of debris.
The front sensors do not activate the warning lights or buzzer.
This is correct operation. The front sensors are
used to defeat false reading when in close contact to walls, railings or parked vehicles.
The buzzer only works when the turn indicators are on.
This is correct operation. The lights should activate
when a vehicle is in the blind spot and detected. The buzzer will only operate when the turn indicator is applied
in that direction.
Can the sensors be painted?
Yes, however a light coat is recommended for best sensing results.
The unit is too sensitive.
By default the system is set at normal sensitivity giving maximum detection range.
This can be set to a lower setting
The unit gives false readings.
Please insure that the response switch is set to the normal setting.
This product is covered by a
one year
manufacturer’s warranty that covers all manufacturing defects of this
product. This warranty does not cover abuse or installation related problems that may occur. Proof of purchase
and installation by a certified Encore dealer will be needed for all warranty claims.
This device is a driving aid and in no way will replaces safe driving habits. Proper use of your mirrors and looking over
your shoulder when changing lanes is always emphasized. Though this devise is state of the art, it should not solely
be relied upon during safe operation of a motor vehicle. The BSD-4 is an accessory that can help the driver change
lanes safely and aid in blind spot detection. Encore Automotive Systems and the installing dealer are not liable for
any and all damages as a result of using this product. Always use safe driving habits regardless of the assistive systems
in use.
For Dealer Tech Support please call 855-463-6267: Ext 3
E
ncore
Automotive Systems
27240 Turnberry Lane Suite 200, Valencia CA 91355
(855) 463-6267