Cautions:
For added protection mount the fixtures in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel.
Before mounting the fixture to any surface, make sure that the installation area can
hold a minimum point load of 10 times the device’s weight.
Fixture installation must always be secured with a secondar y safety attachment, such
as an appropriate safety cable.
Never stand directly below the device when mounting, removing, or ser vicing the
fixture.
from a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture
is kept at least 0.5m (1.5 ft) away from any flammable materials (decoration etc.).
Always use and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injur y in the event the clamp fails.
Mounting points:
Overhead mounting requires extensive experience, including
amongst others calculating working load limits, a fine knowledge of the installation
material being used, and periodic safety inspection of all installation material and
the fixture. If you lack these qualifications, do not attempt the installation yourself.
Improper installation can result in bodily injur y.
Be sure to complete all rigging and installation procedures before connecting the
main power cord to the appropriate wall outlet.
INSTALLATIONS
6
Clamp Mounting:
assembly that integrates the bottom of the base, the included “Hanging Bracket,” and
the safety cable rigging point in one unit (see the illustration below). When mounting
this fixture to truss be sure to secure an appropriately rated clamp to the included
omega bracket using a M10 screw fitted through the center hole of the “
bracket”. As an added safety measure be sure to attached at least one properly rated
safety cable to the fixture using on of the safety cable rigging point integrated in the
base assembly.
Regardless of the rigging option you choose for your
,
always be sure to secure your fixture with a safety cable. The fixture provides a built-
in rigging point for a safety cable on the hanging bracket as illustrated above. Be sure
to only use the designated rigging point for the safety cable and never secure a
safety cable to a carr ying handle.
AuraBeam ™189 Quattro
Hanging
AuraBeam ™189 Quattro
provides two unique mounting bracket
20
21
22
23
24
25
26
27
28
29
30
31
Shutter 2
Dimmer 2
Focus 2
Rotating
prism
Speed
Pan/Tilt 2
Tilt 3
Tilt-Fine
Color
wheel 3
202-209
210-217
218-225
226-255
0-31
32-63
64-95
96-127
128-159
160-191
192-223
224-255
0-255
0-255
0-5
6-127
128-189
190-193
194-255
0-225
226-235
236-245
246-255
0-255
0-255
0-3
4-7
8-11
12-15
16-19
20-23
24-27
28-31
32-35
36-39
40-43
44-47
48-51
52-55
Gobo 15 shake slow to fast
Gobo 16 shake slow to fast
Gobo 17 shake slow to fast
Rot.gobo wheel cont. rotation slow to fast
Shutter closed
Shutter open
Strobe effect slow to fast
Shutter open
Pluse-effect in sequences slow to fast
Shutter open
Random strobe effect slow to fast
Shutter open
Dimmer 0%-100%
In (far) to out (near)
Prism swing out (hole)
Prism swing in
Prism Forwards rotation from fast to slow
Prism rotation stop
Prism Backwards rotation from slow to fast
Max to min speed
Backout by movement
Blackout by all wheel changing
No Function
No Function
No Function
No Function
No Function
Tilt1 Movement
Fine control of Tilt movement
Open/White
White+Color 1
Color 1
Color 1 + Color 2
Color 2
Color 2 + Color 3
Color 3
Color 3 + Color 4
Color 4
Color 4 + Color 5
Color 5
Color 5 +Color 6
Color 6
Color 6 + Color 7
