Encom Harmony IP I/O8, User Manual

Page: 25 / 44

Harmony IP I/O8 Network Monitoring & Control User Manual
21
SNMP TAB
The SNMP tab allows your IP I/O8 to be configured for use in an SNMP-based network. Note that
you must first click the
Enable SNMP Operation checkbox to configure SNMP settings.
The settings specific to SNMP operation are described below:
•
SNMP General Setup – Allows you to set up general SNMP settings
o
Read/Write Community Name : The name (or string) that permits access to device
information
o
Trap Version : Select the SNMP version(s) of the trap messages generated from your IPIO8
o
Trap Manager Host IP : IP address of your Trap Manager software
o
Trap Community Name : string included when IP I/O8 sends Traps to your Trap Manger
software
•
SNMP V3 Setup – Allows you to set up settings specific to SNMP V3
o
User Name : Login name to access your IP I/O8 SNMP information
o
User Authentication Level : Select the level of security desired for the SNMP network
o
Authentication Password : Password used to confirm user identity
o
Privacy Password : String used to encrypt SMNP V3 messages