Enclume SPR1 Assembly And Installation Instructions Download Page 2

 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

ASSEMBLY AND INSTALLATION INSTRUCTIONS 
 

Rack Assembly 
 

1)

 

Place one face plate in the notch at one end of oval.  Place the arm on the inside of the wood with the “L” shape (grid bracket) 
facing in.  Using a 3/8

"

 x 1 1/4

"

 button head, screw through the face plate in (so that the head of the screw is on the outside) and 

through the wood into the arm.  Repeat for the other 3 arms. 
 

2)

 

Attach the rolled end bar to the top of the arms using the two 3/8

"

 x 1

"

 button head screws and the two nuts. Insert the extension 

hooks into the holes in the rolled bar. 
 

3)

 

Square up the arms and tighten all the screws with the allen wrench.  
 

4)

 

Place the grid on the brackets.   The assembly is now complete. 

 

5)

 

Hang your pot hooks from the interior squares only.  

Do not 

hang them from the perimeter or the cut portions of the grid. 

Distribute your cookware evenly. 

 

Installation 

 

6)

 

We recommend that you anchor your rack into the solid wood of ceiling joists or beams.  Carefully measure the area where the 
rack is to be hung and install the ceiling screw hooks directly into the wood joists.   If it is not convenient to hang your rack 
directly into wood joists you may use the included DRYWALL anchors in the toggle kit included with your rack.   See Toggler® 
brand manufacturer recommendations for weight limits included in the instructions in the Toggle kit. 

 

 

It is important that your rack is assembled correctly. If the unit is assembled or used 

incorrectly, it could become unstable and collapse, possibly causing injury. 
 

 

 
 

 

WARNING

Limited Warranty: 

This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall 

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the 
warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339,  

postage prepaid

 within 

20

 

days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by 
Enclume. There are no other warranties, expressed or implied. 

THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING 
OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.

 

Reviews: