Assembly and Installation Instructions for the BSBB1
1)
Lay the rectangular uprights side by side on the floor in the correct relationship to one another, about 24” apart.
2)
Notice the rivet placement on the shelf rims. When the rims are right side up the rivets are positioned closer to the bottom of
the shelf rim than the top. This positioning allows the grid shelves to seat deeply inside the rim. Slide one of the shelf rims
inside
the rectangular uprights. Attach the rim to the uprights using 8 – ½” button head screws. The button heads should be
inserted front to back so the head is visible from the outside of the sideboard.
Leave the screws loose.
3)
Repeat Step 2 for the second shelf rim.
4)
Attach the steel trim band to the
outside
of the rectangular uprights using the last four ½” button head screws.
5)
Stand the base on its feet.
6)
Square up the base and tighten all the screws.
7)
Slide the grid shelves into the middle and lower shelf rims with the long wires facing upward.
8)
Put the butcher block work surface on top of the unit. The back of the board should be flush with the back of the rectangular
uprights. Align the holes on the bottom of the work surface with the slots on the top of the rectangular uprights. Attach the
pieces together with four 7/8” button head screws and the small Allen wrench.
9)
We recommend the sideboard be placed tightly against a wall. The two 2 ½” lag screws are for attaching the rack to the wall
should you wish to do so. Four extra holes have been drilled in the back of the steel trim band. The holes are drilled on
16” x 32” centers to match standard wall stud placement. If the positioning of the holes does not match those of your wall
studs, you may drill new holes in the trim to align the rack.
10)
All of our hammered steel racks are finished with an industrial finish designed to give years of protection. Cleaning is easily
done with a damp cloth. Dry thoroughly after cleaning. If a touch up is ever needed, we recommend a product like “Pledge”
wax.
11)
The butcher block surface has been penetrated with natural mineral oil. To main the finish, we recommend a periodic
application of mineral oil rubbed into all of the wooden surfaces.
Butcher Block Work Surface
Steel Trim Band
Rectangular
Upright Support
Shelf rim
Shelf rim
Foot
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Enclume Design Products, Inc.
,24 Colwell Street, Port Hadlock, WA. 98339
Phone 360-385-6100
•
Fax 360-385-6156
