3b. Enclave Audio CineHub Rear Panel Connections
1. DC Power
2. 3.5mm AUX Stereo Analog Audio
3. Optical Digital
4. HDMI for eARC/ARC use only
4. INSTALLATION AND SETUP
Follow these instructions to initially setup and use the Enclave CineHome System II/Pro,
CineHub, and CineKey.
Check out our videos to see the setup in action at
www.enclaveaudio.com/setup
10
9
4a. PLACE YOUR SPEAKERS
1. Arrange your speakers as shown in the “General Speaker Placement”
on the next page.
2. Make sure the center speaker is centered above or below the television screen.
3. The speakers must all point relatively toward the center of the room.
Avoid placing them behind furniture, plants, or other objects for best results.
4. Add power to your speakers using the enclosed power cables included with your
Enclave speakers. The blue LED will begin to flash and remain flashing until paired
to the CineHub/CineKey.
4b. CONNECT POWER AND cabling TO THE ENCLAVE CINEHUB
(CINEKEY CUSTOMERS SKIP TO STEP 5)
HDMI
HDMI CABLE
HDMI ARC
TV CONNECTIONS
(1)
(2)
(3)
(4)
Enclave_Manual_FINAL_ReaderSpreads.indd 10-11
9/6/19 1:12 PM