Users’ Manual
Digital Node (Wireless-RF)
Page
|
1
1
QUICK START GUIDE
Generally, we send devices pre-configured. If your devices are pre-configured by us, please go through
the user-friendly procedure to get started with your ER Beam system, which takes only a few minutes to
get the process rolling.
1
Power on Gateway and turn on its inbuilt Wi-Fi network.
2
Connect your Android phone to the ER Beam Wi-Fi network.
3
Connect the Android cable to the phone first using the OTG adapter.
4
Open the ER Beam Offline Android app.
5
Load the project and tap on it to go to the home screen of the app.
6
Then connect the Android cable's other end to the Node and click on Setup Device and follow the
wizard.
7
Repeat step 6 for all your Nodes.
8
Then press the Cloud Sync on the app to sync back all the Node settings to the gateway.
9
Now the Nodes will send the sensor data at the configured time intervals.
10 Optionally, the data can be exported and engineering conversions can be set using the Gateway
software.
