Users’ Manual
ESM-40S High sensitivity settlement monitoring system
Page
| 17
7 CONFIGURATION OF ESM-40S WITH ESDL-30 DATALOGGER (SDI-12)
NOTE:
For details on operation of model ESDL-30 datalogger, please refer to
Users’ Manual #
WI6002.111.1 on “Operation” of ESDL-30 datalogger.
For details of configuration with
model ESDL-30 datalogger, please refer to
Users’ Manual WI6002.111.2 on “Configuration
Manager for Windows” of ESDL-30 datalogger.
The
manuals are
available at our website
A brief on connection and configuration for model ESM-40S sensor with SDI-12 output is given below.
1. Double click the ESDL-30 datalogger software icon on the Desktop. The main screen of the application
appears as displayed in figure below
Figure 7-1 Main menu
2. Connecting Data Logger: Click “Datalogger” followed by “Connect/Disconnect Datalogger”. A
“Connection” window will appear as shown below. Select the usable “Com port” and then click
“Connect”. The progress bar appears on the screen as the application takes few seconds to get
connected.
3. After successful connection, information message pops up on the screen confirming successful
connection. Press “OK” to proceed. This will change “Connection Status”, at the left bottom, from Red
to Green.
Figure 7-2 Connection
