SS302 USER MANUAL
EL-SS302-001
Enblink Co., Ltd.
Page 14
August, 2014
1)
Plug Enblink in into the phone using an USB OTG cable.
2)
Portable Inclusion screen might be popped up.
3)
You can pair a device like a normal inclusion.
4)
Once pairing is done, you can plug Enblink out from the phone and then plug in
into the Set-top box used before.
5.3.
Compatible devices
Lighting Security Sensors Door Locks IP Cameras
All other Z-wave devices in addition to above devices can be controlled by SS302.
You can control light switches or thermostats in your living room. Complicated
installation is not required and just simple pairing is enough to control devices.
Please refer
here
to learn more Z-Wave devices
5.4.
Control devices
1)
Monitor and control states of each device accordingly
2)
A device is added, removed, edited or reset on [Device Management] tile.
