Enatel RW312U, Installation And Operation Manual

Page: 5 / 26

Enatel DC System Manual Page 5 of 26
Model: RWxxx Version: 3.6
1 S
AFETY
All installation and maintenance must be carried out by
suitably qualified personnel.
For your protection, the product manual should be read and
thoroughly understood before unpacking, installing and
using the equipment.
2 I
NTRODUCTION
The RW range of freestanding convection cooled wall-mount rectifiers consists of the
following models:
Table 1: RW Models
Model Input Volts Max Input
Current
Nominal
Voltage
Rated
Voltage
Voltage
Range
Maximum
Current
Power
Rating
RW312U
110 – 240V 4A 12V 13.7V 11.5-15V 20A 300W
RW324U 110 – 240V 4A 24V 27.4V 22-30V 10A 300W
RW348U 110 – 240V 4A 48V 54.0V 45-60V 6A 300W
RW512U 110 – 240V 8.5A 12V 13.7V 11.5-15V 35A 500W
RW517U 110 – 240V 8.5A 17V 17.4V 13-17.6 26A 500W
RW624U 110 – 240V 8.5A 24V 27.4V 22-30V 22A 600W
RW748U 110 – 240V 4A 48V 54.0V 45-60V 12A 700W
The features of the rectifiers are:
•
Convection Cooled
•
Thermal Protection
•
Power Factor Corrected
•
Input/Output Voltage and Current
Protected
•
Temperature Compensation
•
Built in LVD - Battery Low Voltage
Disconnect (Option)
• Automatic Boost/Float Charge cycle
• Active Load Sharing when operated
in parallel with another rectifier
• External Alarm and Control interface
(Option)
• Bar Graph Current Indicator
• Integrated Alarm Outputs (Option)