PETROL VIBRATING SCREEDS “HURACAN” TYPE
7
en
7.-
Every 12 months
or more frequently, the screed has to be sent to an authorized workshop for
service according to the intensity of the usage.
8.-
Do not fill the fuel tank while smoking or near any other potential source of danger.
Lock the petrol admission key when filling, use unleaded gas, clean the gas spelt.
9.-
Idle speed of the motor must not exceed 3.000 rpm. (standard set).
By every maintenance operation, the idle speed of the engine has to be checked and adjusted
at 3.000 rpm.
See the engine manual to set the engine speed, starting and stopping.
GENERAL MAINTENANCE
1.-
Always use original parts by every maintenance operation.
2.-
The bearings of the motor do not need a periodic maintenance.
3.-
The safety fittings have to be checked after every maintenance.
4.-
Every 12 months
or more frequently the screed has to be sent to an authorized workshop for
service according to the intensity of the usage.
5.-
Re-screw the nuts and bolts daily.
4.3 STORAGE
Always store the screed in a clean and dry area when not used for a long period of time.
4.4 TRANSPORTATION
Make sure the screed won’t suffer any ripping or shock that could cause any damage
.
5
LOCATING MALFUNCTIONS
PROBLEM
CAUSES/SOLUTIONS
The motor doesn’t work
Check the gas level.
Check the gas admission key is open.
Check the de choke position.
The screed doesn’t vibrate
Check the engine oil level.
Check the exciter’s transmission.
6
INSTRUCTIONS TO ORDER SPARE PARTS
6.1 INSTRUCTIONS TO ORDER SPARE PARTS
1.-
Every spare parts order must include PART CODE NUMBER AS STATED IN THE PARTS
LIST. We recommend including the MACHINE SERIAL NUMBER.
2.-
The identification plate with serial and model number is located as shown in the point 2 of this
manual.
3.-
Let us to know the right shipping instructions, including the wished route, the address and the
consignee complete name.
4.-
Do not return the parts without authorisation, the return is done with freight prepaid.
Summary of Contents for HURACAN GH
Page 2: ......