+ Add device
5
6
Connect the Electrolyser to Enapter Cloud
Access the Electrolyser’s Web GUI
Open the Enapter App and follow the steps to create your site
in the Enapter Cloud.
Make sure antenna is turned on (blue led steady on the front panel
of electrolyser).
Power on the device.
Press the Add device button.
Scan QR-code located on the front
side of the device and follow the
Enapter app instructions.
Device connected.
To download the Enapter mobile app, scan
the QR-code or visit app.enapter.com from your
Android or Apple mobile phone.
6
Skip this step for isolated setups with no internet connection.
For Isolated setups with no internet connection use Enapter Web
GUI (Graphical User Interface) to monitor and control the device
locally through a web browser.
Insert the opposite end of
the pipe to the Fill/Drain Port.
Connect the refilling pipe to the bag
using the special connector.
Press Exit Maintenance Mode button.
Electrolyser Is Ready for Hydrogen Production.
Prepare electrolyte bag with 2L 1,54% KOH concentrate and
supplied refilling pipe.
Make sure electrolyser is in maintenance mode and drained.
Instructions on how to access Electrolyser’s Web Interface are
available at handbook.enapter.com.
Water inlet must be
connected during electrolyte
refiling and draining routines
for Electrolyser 4.0.
Follow Enapter App or Web GUI instructions to refill
the electrolyser for the first time.
For sites with a local WiFi network. This connection type allows
users to access web interface of multiple electrolysers' and also
use it via mobile web browser.
Connection via ETH (Ethernet) port on the front panel of the
device allows users to access the web interface of a single
electrolyzer.
7
The First Electrolyte Refilling
H2O IN
Click!
To start refilling carefully raise the electrolyte bag above the device.
Refilling will start automatically.
Pour out all concentrate from the electrolyte bag.
Disconnect refilling pipe from the Fill/Drain port.
Electrolyser is Ready for Use!
10
During normal operation the LEDs indicate the status of the
machine. Monitor device activity in Enapter App or Enapter Cloud.
8
Ethernet
cable
Local WiFi Network
A
B
Option A
Option B
Visit marketplace.enapter.com to find out which device integration
Blueprints are already available. To learn how to develop your own
Blueprints visit developers.enapter.com.
To integrate solar invertetrs, power meters, fuel cells, irradiance
sensors, etc to Enapter Cloud you will need a suitable Universal
Communication Module (UCM) and a Blueprint.
Connect any energy devices to Enapter Cloud
948275
Optional