Page 8
5
Suitable ENAiKOON devices for tracking trees
5.1
ENAiKOON locate-15
Most ENAiKOON clients who want to equip cut trees with a GPS tracking device
decide to use ENAiKOON locate-15.
The main reason is that it is much easier to cut a hole with a chain saw for ENAiKOON
locate-15 than drilling a 30mm hole for ENAiKOON locate-18.
5.1.1
Installation inside the tree
1)
Cut a small cover slice off the tree (approx. 10 mm thick; if it is thicker then GPS
reception might be limited or prevented)
2)
Cut a hole for the device with the chain saw as follows:
3)
Insert the device into the hole with the top of the housing pointing to the out-
side of the tree (axial)
